Canon CXDI-40G COMPACT Service Manual page 114

<Reference 1>
In the data and graph below, the data was obtained by setting the Kodak MLP 190 to curve
shape 0 (density linear), a maximum density of 3.20, the SMPTE test image was printed out,
and the image data was measured.
As shown in the graph, the data from the minimum density (film base density) to the
maximum density nearly form a straight line.
Step 1
Percentage 0
Density (D) 0.17 0.46 0.75 1.03 1.36 1.66 1.98 2.29 2.59 2.90 3.20
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
1 2
* The printer parameter settings in this case are:
A 320 -T NO -M CUBIC -m NORMAL -S CS000
2 . I n s t a
2 . I n s t a
SMPTE Density
2 3 4 5
10 20 30 40
3 4 5 6
Step
- 94 -
l l a t i o n
l l a t i o n
6 7 8
50 60 70
7 8 9
9 10 11
80 90 100
10 11