Installing The Camera Base - Bosch FLEXIDOME panoramic 5100i IR Installation Manual

16 en | Installation
In order to ensure proper wall installation with the Bosch logo showing up straight on top, the
mounting plate needs to be install as shown above.
5.1.3

Installing the camera base

1.
2.
3.
4.
5.
6.
2022-10 | V02 | F.01U.385.630
Put the RJ-45 punch-through aid on the network cable.
Remove the tube(s) from the M20 rubber grommet(s).
Put one M20 rubber grommet on the tip of the RJ-45 punch-through aid.
If auxiliary connection cables are used, pull it through the other cable inlet. Only one
cable per grommet to ensure watertight installation.
Slightly pull back the M20 rubber grommets on both cables to make sure that the
grommet sleeve faces the source of the cables.
Fix the M20 rubber grommets in both cable inlets to make sure that the cable inlets are
firmly closed.
Installation manual
FLEXIDOME panoramic 5100i IR
Bosch Security Systems B.V.