Bosch FLEXIDOME panoramic 5100i IR Installation Manual page 13

FLEXIDOME panoramic 5100i IR
The mounting plate is used to fix the camera to a flat surface or together with a mounting
accessory. It offers different holes and slots for a variety of mounting options.
4
3
2
1
Additionally, the camera can cover various mounting options when combined with the
available accessories. Refer to Optional mounting accessories for the available accessories.
Notice!
i
The plugs and screws for surface mounting are not supplied with the camera.
1.
Bosch Security Systems B.V.
1 A
Mounting holes for 4 inch or 4S
electrical box installation. There are
four mounting holes available on the
mounting plate, but you need only two
for the installation. You can install the
mounting plate in different
orientations.
3 PIP
Mounting holes for installation with
NDA-5080-PIP and NDA-5080-PIPW.
Required screws are provided with
NDA-5080-PIP and NDA-5080-PIPW.
5 D
Mounting holes for single gang box.
Align the two slotted holes on the
mounting plate with the two screw
holes in the electrical gang box.
Position the mounting plate with the center hole on top of the cable exit on the surface.
2 B
4 C
Installation manual
Installation | en
5
Mounting holes for standard wall or
ceiling installation. Use four screws. If
required, use plugs (for concrete
walls/ceilings).
Mounting holes for double gang box
installation. Align the mounting plate
with the four screw holes in the
electrical gang box.
2022-10 | V02 | F.01U.385.630
13