Toro 79030 Installation Instructions

Cargo Carrier
TimeCutter
Model No. 79030
Note: If you have a bagger, use the same weights from the
bagger for the cargo carrier.
Note: If you do not have the weights from a bagger, obtain
the correct weight kit from an Authorized Toro Dealer.
Safety
DANGER
Engines can become hot when they are operating.
Severe burns can occur from contacting hot
surfaces.
Allow engines, especially the muffler, to cool before
touching.
The following list contains safety information specific to Toro
products and other safety information you must know.
•
Become familiar with the safe operation of the equipment,
with the operator controls, and safety signs.
•
Use extra care with attachments. These can change the
operating characteristics and the stability of the machine.
•
Follow the manufacturer's recommendations for adding
or removing wheel weights or counterweights to improve
stability.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Series Riding Mower
109-7076
Register at www.Toro.com.
•
Do not use the attachment on steep slopes. A heavy load
could cause loss of control or overturn the machine.
•
Slow down and use extra care on hillsides. Turf conditions
can affect the machine's stability. Use extreme caution
while operating near drop-offs.
•
Keep all movement on slopes slow and gradual. Do not
make sudden changes in speed, directions or turning.
•
The attachment can obstruct the view to the rear. Use
extra care when operating in reverse.
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Keep hands and feet away from moving parts. Do not
make adjustments with the engine running.
•
Stop on level ground, disengage drives, set the parking
brake, shut off engine before leaving the operator's
position for any reason including emptying the
attachment.
•
If you remove the attachment, remove the weights.
•
Stop the engine before removing the attachment.
•
Do not leave a load in the attachment for extended
periods of time.
•
Frequently check components and replace with
manufacturer's recommended parts, when necessary.
127–0051
1. Maximum carrier frame
load is less than or equal
to 100 lbs (45 kg).
Original Instructions (EN) All Rights Reserved *3377-665* A
Printed in the USA.
Form No. 3377-665 Rev A
Installation Instructions
2. Warning—do not sit or ride
on the carrier frame; read
the Operator's Manual.