Battery Drawer - Siemens KION Service Manual

KION / KION-i
9 < ;
@
A
E382 E392E 061 01 02 02

Battery drawer

H 6
The battery drawer can be pulled out from the cart
for easy access. It contains functions for power
supply and communication:
1. AC/DC Converter
2. Internal battery. An optional Extra internal battery
Included in the Battery drawer is also the Power &
Communication interface containing:
3. Communication ports
4. PC 1747 CAN/RS232 I
5. PC 1753 DC/DC C
6. PC 1675 P
7. MIB C
8. C
?
9. C
=

The following cables are connected to the Power &
Communication interface:
.
10. Multigas analyzer communication cable (RS232)
11. Multigas analyzer power cable (24 V DC)
12. DuoView cable (RS232 & supply voltage)
13. CAN loop-back
!
14. KION / KION-i Monitor communication cable
"
15. Isolation transformer cable (optional)
16. AC/DC Converter cable.
#
Siemens-Elema AB
can be installed to prolong the backup time.
NTERFACE
ONVERTER
S
OWER UPPLY
(MIB = Medical Information Bus):
ONNECTOR
– PC 1761 for KION with S/N 03645 or lower.
– PC 1843 for KION / KION-i with S/N 03646 or
higher.
board:
ONNECTOR
– PC 1754 for KION with S/N 03645 or lower.
– PC 1856 for KION / KION-i with S/N 03646 or
higher.
I board:
OMMUNICATION NTERFACE
– PC A101 CPS N
ETWORK
PC A301 M O
ONITOR PTION AND
B for KION with S/N 03645 or lower.
OARD
– PC A110 IDS N PCB and PC A120 CAN/
ETWORK
MIB for KION / KION-i with S/N 03646 or higher
(not shown in illustration).
These PC boards are also included in the Siemens
patient monitor Communication/Power Supply
module alt. Infinity Docking Station module. For
further information regarding these modules,
refer e. g. to the SC 7000/9000XL or SC 9000
Service Manuals.
(TAXI and supply voltage)
Introduction
PCB including the small
S M
ETUP EMORY
2 - 3
2