5 Maintenance
5.2 Maintenance schedule
Maintenance action
Run System CIP (System cleaning-in-place)
Sanitize the instrument
Clean and store the pH electrode
Clean the conductivity flow cell
Calibrate the conductivity monitor
Reset pressure sensors
Replace tubing and connectors
Replace the UV flow cell
Replace pump rinsing system tubing
Replace mains fuses
Run performance tests
94
Instructions
See the ÄKTA pilot 600 Operating
Instructions
See the ÄKTA pilot 600 Operating
Instructions
See the ÄKTA pilot 600 Operating
Instructions
Section 5.3.1 Clean the conduc-
tivity flow cell, on page 96
Section 5.4.2 Calibrate the con-
ductivity monitor, on page 104
Section 5.4.1 Reset the pressure
sensors, on page 101
See the ÄKTA pilot 600 Operating
Instructions
Section 5.5.3 Replace the UV
monitor flow cell, on page 114
See the ÄKTA pilot 600 Operating
Instructions
See the ÄKTA pilot 600 Operating
Instructions
Chapter 6 Performance tests, on
page 119
ÄKTA pilot 600 User Manual 29274559 AA