Post-Installation Instructions; Figure 4-1 Jumper Setting Label Location - Acer AcerPower 2100 User Manual

4.1.3

Post-installation Instructions

Observe the following after installing a system component:
1. See to it that the components are installed according to the step-by-step instructions
in their respective sections.
2. Unplug the system unit.
3. Make sure you have set all the required jumpers. See section 2.3.2 for the correct
jumper settings or refer to the jumper setting label pasted inside the system cover.

Figure 4-1 Jumper Setting Label Location

4. Replace any expansion boards or peripherals that you removed earlier.
5. Replace the system cover.
6. Connect the necessary cables and turn on the system.
jumper settings
label
Chapter 4 - Installing Optional Components 4-3