Setup Password - Acer AcerPower 2100 User Manual

Setup Password ................. [

Power-on Password .............. [
3.9.1 Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
Setting a Password
1. Make sure that switch no. 2 of SW1 is set to Off (bypass password).
You cannot enter the BIOS utility if a Setup
password does not exist and switch no. 2 of SW1
is set to On (password check enabled).
By default, switch no. 2 of SW1 is set to Off
(bypass password).
2. Enter the BIOS utility and select System Security.
3. Highlight the Setup Password parameter and press
appears:
3-26 AcerPower 2100 User' s Guide
System Security
None
None
]
]
or . The following screen