Acer AcerPower 2100 User Manual page 87

Plug and Play OS
When this parameter is set to
cards. When set to No , BIOS initializes all PnP boot and non-boot devices such as sound
cards.
Set this parameter to
system is Windows 95 (or higher).
Reset Resource Assignments
Set this parameter to Yes
cards. This clears all resource assignments and allows BIOS to reassign resources to all
installed PnP devices the next time the system boots. After clearing the resource data, the
parameter resets to No .
Refer to section 4.3.2 for instructions on installing and configuring ISA cards.
Yes , BIOS initializes only PnP boot devices such as SCSI
only if your operating
Yes
to avoid IRQ conflict when installing non-PnP or PnP ISA
Chapter 3 - BIOS Utility 3-35