Hitachi EUP-B712 Instruction Manual page 9

Biopsy probe

Table of Contents

1.5 Option

1.5.1

Magnetic Sensor Attachment

1.5.2

Spacer for EZU-RV2S

1.5.3

Needle Guide Bracket EZU-PA7C2

1) Needle guide bracket ·········

2) Brush ························

3) Spring (Spare) ···············

4) Instruction manual ···········

5) Case ·························

1.5.4

GENERAL PURPOSE Ultra-Pro II™ DISPOSABLE STERILE ULTRASOUND

NEEDLE GUIDE/COVER KIT (610-579 or 610-608).

Purchase the Ultra-Pro II™ NEEDLE GUIDE/COVER KIT (610-579 or 610-608)

directly from CIVCO MEDICAL INSTRUMENTS or an authorized CIVCO

distributor.

1.5.5

GENERAL PURPOSE Ultra-Pro 3™ DISPOSABLE STERILE ULTRASOUND

NEEDLE GUIDE/COVER KIT (610-901) (Option).

Purchase the Ultra-Pro 3™ NEEDLE GUIDE/COVER KIT (610-901) directly

from CIVCO MEDICAL INSTRUMENTS or an authorized CIVCO distributor.

1) Sterilization has not been made to the probe, the Needle guide bracket,

the Magnetic sensor attachment and the Spacer for EZU-RV2S shipped

from the factory. Prior to use of them, be sure to clean, disinfect

and if necessary sterilize them following this instruction manual.

2) Do not attach the devices except for the Ultra-Pro II ™ or the

Ultra-Pro 3™ NEEDLE GUIDE/COVER KIT to the Needle guide bracket

EZU-PA7C2.

3) A biopsy should be performed only by a well-trained physician.

1 piece

2 pieces

1 copy

1 piece

CAUTION

-3-

Q1E-EP1412

Table of Contents