Hitachi EUP-B712 Instruction Manual page 12

Biopsy probe

Table of Contents

Before use, make sure there is no damage to the surface to which the

needle cannula is attached, and the needle guide works properly.

3) Confirm that the needle guide angle corresponds to the angle

indicated on the monitor. The needle guide angle is engraved on

bracket. (See Fig. 3)

Needle guide

angle

4) Visually inspect the cover to ensure that there are no defects or

holes. Do not use the cover if it has any holes and tears.

2.2.3

Magnetic sensor attachment and Spacer for EZU-RV2S

Visually inspect that the surface of the Magnetic sensor attachment

and

the

Spacer

denaturalization.

Because the Spacer for EZU-RV2S is small, please do not lose the spacer.

CAUTION

21°

Fig. 3 Needle guide angle

for

EZU-RV2S

CAUTION

Needle guide angle

is engraved

for

any

crack,

-6-

deformation

Q1E-EP1412

Table of Contents