Marking Field And Marking Center Position - Panasonic LP-RF Series Setup & Maintenance Manual

2-3-3 Marking field and marking center position

Specified point
Laser emission port diameter
q
Work distance
w
Marking field (X, Y)
e
Distance to center of marking field
r
Distance to center of marking field
t
q
r
• Do not place anything in the area between the laser emission port and work pieces during the lasing operation.
• Use anti-reflection material (ex. black paint for metal) for an external shutter or a protective enclosure in a path of laser
beam. It may cause a failure of the components inside the laser marker head.
• If any other devices such as a sensor or a camera are installed near the laser marker, make sure that these devices are
installed in the place where laser beam and its reflected beam do not damage to them.
40
LP-RF200P
φ87 mm
190 mm
90 mm × 90 mm
67.5 mm
152 mm
w
e
ME-LPRF-SM-11
t