Introduction; Additional Documents - Siemens DMS8000 MP4.81 Operation Manual

1 Introduction

1.1 Additional documents

Building Technologies
CPS Fire Safety
Siemens fire safety and security products are designed to work together. While
there are many occasions where only one product may be used in a facility, when
combined our products create a robust and flexible set of architectural and
connectivity solutions. The possible combinations of Danger Management Systems
(DMS), network choices, and subsystems used in any given plant are extensive.
However, the time involved with commissioning tasks can be substantial.
With the aim of reducing time spent on configuration, Siemens BT FS has
developed their products so that the DMS and the networks can all be configured
with a single tool called WW8000 Composer.
The networks and subsystems supported by our Danger Management Systems are
always configured in the same way within the Composer environment.
What this document contains
This document includes the configuration procedures for the video subsystems
supported by our DMS8000 products. It discusses in detail how to configure these
systems by hand.
What this document does not contain
Each DMS carries a different set of technical and behavioural characteristics that
interact with the networks and subsystems. These differences typically appear as
additional tabs in the network and subsystem work areas of Composer. However,
since these tabs are always associated with attributes specific to the DMS being
used, they are not discussed in this manual. This information can be found in the
corresponding product manual.
Reference documents are listed in the Resource Information document (see About
this document [➙ 4]).
Depending on your level of experience with Composer, and the architectural
solutions available with our products, as well as where you are in the
commissioning process, there are a number of additional documents that you may
find useful. If you need a document that you do not have, you can download it on
the Siemens Intranet.
Please see the following descriptions of relevant additional documents:
The Composer WW8000 Technical Manual contains mostly introductory
l
information for new users of Composer. In addition to general introductory
information, it contains details about several functions and shortcuts that can
be useful for users. This manual is typically included with the documentation
set that comes with each product. The document number is A6V10062401.
The Application and Planning guide (A6V10063710) shows the architectural
l
solutions currently available with the DMS systems, including network and
subsystem connectivity options. These documents are a kind of library of
technical solutions, and are intended primarily as sales tools, but provide an
overview of the relationships within the system that may be useful when
planning a configuration.
The product-specific Installation Configuration & Commissioning manual (ICC)
l
is the necessary complement to this manual for getting a complete view of the
configuration process. Please refer to the latest edition of the following
document:
– MM8000 ICC (A6V10062413)
– MT8001 ICC (A6V10096181)
– MK8000 ICC (A6V10062407)
– NK8000 ICC (A6V10062437)
Introduction
Additional documents
A6V10359489_a_en
30.09.2016
1
7