Writing Rfid Data To The Transponder - Siemens SIMATIC S7-1500 Manual
Reading and writing rfid data via io-link
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
5 Operating the Application
5.3
Writing RFID data to the transponder
The following table provides instructions for writing RFID data to the transponder.
The "IOL_Station_WRITE" screen is used here.
Table 5-2
No.
1.
In the input fields "Timer" and "Length" you enter (an "Offset" if desired) the values
relevant for writing the RFID data.
2.
Enter your desired data in the 24 input fields of "Write Data".
As soon as the data has been entered, you click on the "WRITE" button.
3.
If the write job has been completed successfully, this is indicated by the green
"DONE" signal.
Read/write data with IO-Link
Entry ID: 73565887,
V3.4,
06/2022
Action
(see Chapter
2.2.1)
30
Advertisement
Table of Contents
