GE MDS TD220MAX Manual page 19

TD220MAX_manual_v11.doc
Notes: The Polling interval should be set to something fairly short to make sure the survey territory
is adequately painted, however setting it below 500 ms or so may exceed the transmit duty cycle of
the radio and/or overflow the radio's input buffer and should be avoided. Setting "Stop After (polls)"
to zero causes the base Poller to continue transmitting messages indefinitely. "Parse Response"
can be set to "No" as the base Poller will transmit only.
05-6906A01 Page 19 of 49 7/31/2014