Operation - Bosch Intuvia 100 Owner's Manual

English – 10
Connection of the On-Board Computer with
the eBike System (Pairing)
Your on-board computer is generally already con-
nected with the eBike system. If this is not the case,
proceed as follows:
– Install the eBike Flow app.
– Activate Bluetooth® on your smartphone and open
the eBike Flow app.
– Briefly press the Bluetooth® button.
– The device identification is shown on the display.
– Select the required tool with the same identifica-
tion in the eBike Flow app.
You can find further information at the following link:
https://www.bosch-ebike.com/de/help-center/
.
intuvia-100
Depending on the operating system of the
smartphone, the eBike Flow app can be
downloaded free of charge from the Apple
App Store or Google Play Store.
Scan the code with your smartphone to download the
eBike Flow app.
Switching the On-board computer On/Off
Switch on the eBike system.
To switch on the on-board computer, gently move
the eBike or tap the display.
The following options are available for switching off
the on-board computer:
– Press the ON/OFF button on the operating unit to
switch off the eBike system.
The on-board computer is also switched off.
– Remove the on-board computer from its holder.
The on-board computer switches off automatically
after 60 s.
Power supply of the On-board Computer
The on-board computer is provided with energy by
the CR2450 button/coin cell.
0 275 U07 3BI | (08.06.2022)

Operation

Changing the Non-Rechargeable Battery
(12)
When the non-rechargeable battery of the on-board
computer is nearly drained, you're shown a corre-
sponding message on the display. Open the battery
compartment cover (2) with a slotted screw-
driver (12), remove the used non-rechargeable bat-
tery and insert a new non-rechargeable battery of type
CR2450. You can obtain the non-rechargeable
batteries recommended by Bosch from your bicycle
dealer.
When inserting the non-rechargeable battery, ensure
that the rubber seal (10) is correctly positioned. Seal
the battery compartment and slide the on-board
computer onto the holder.
Battery Charge Indicator
The on-board computer shows the state of charge of
the eBike rechargeable battery in percent. A notifica-
tion is displayed once when the battery's state of
charge falls below 30 %, and again when it falls below
10 %. The notification can be confirmed, or it simply
disappears after 5 s.
Operation
The Bluetooth® (1) button has various functions. If
the on-board computer was connected with an oper-
ating unit and has been removed from the holder, the
displays can be switched within 60 s. To do so, briefly
press the Bluetooth® (1) button.
(2)
(11)
(10)
Bosch eBike Systems