Introduction; Summary - Motorola AltiVec MVME5100 Series Installation & Use Manual

Introduction

This chapter provides information on pin assignments for various jumpers
and connectors on the MVME5100 Single Board Computer.

Summary

The following tables summarize all of the jumpers and connectors:
Jumper
J1 Riscwatch Header
J2 Pal Programming Header
J4 Ethernet Port 2
Configuration
J5 Planner Serial Port 2
J6, J20 Operation Mode Jumpers
J7 Flash Memory Selection
J10, J17 Ethernet Port Selection
J15 System Controller (VME)
J16 Soldered Flash Protection
5Pin Assignments
Description Connector
J3 IPMC761 Interface
J8 Memory Expansion
J25 PCI Expansion Interface
J11 - J14 PMC Interface (Slot 1)
J21 - J24 PMC Interface (Slot 2)
P1, P2 VMEbus Interface
J9 Ethernet Interface (LAN1)
J18 Ethernet Interface (LAN2)
J19 COM1 Interface
J5 COM2 Interface
5
Description
5-1