Figure 6-13 G-2426G-B Ont And Psi Ups; Figure 6-14 Battery Pack Onto Power Supply/Charger - Nokia ONT Product Manual

Install a G-2426G-B indoor ONT
Connect a UPS to a G-2426G-B ONT

Figure 6-13 G-2426G-B ONT and PSI UPS

3-prong
AC plug
The following figure shows an example ONT and UPS. The position of the connections may differ for each ONT model
3
Remove the back cover to expose the battery connectors.
Slide Battery pack onto Power Supply/Charger unit until the Battery Pack becomes fully flushed
with Power Supply/ Charger as shown in
(p. 84).
You should hear a click when battery pack is fully seated.
The UPS can remain on the desk or be placed on the floor underneath the desk.
Two battery extensions are needed for 8 hours of emergency support calls. Four battery
extensions are needed for 24 hours of emergency support calls.
Install the UPS back cover in the bottom of the last battery module to protect the connectors to
additional batteries.
June 2021
Issue 1
Battery
Mute
DC
System Status
Alarm silence
Cold start
UPS
Reset
connector
Output
connector
Figure 6-14, "Battery pack onto Power Supply/Charger"
3FE-49441-ABAA-TCZZA
Molex DC cable AC power cable
Nokia ONT
36155
83