Configure a G-2426G-B indoor ONT
Configuring the Application
Configuring DDNS
Table 8-37 Port Triggering parameters
Field
Application Name
Open Port
Triggering Port
Expire Time
Open Protocol
Trigger Protocol
Enable Triggering
WAN Connection List
3
Click Add.
E
ND OF STEPS
8.42 Configuring DDNS
1
Click Application→DDNS from the left pane in the GPON Home Gateway page. The DDNS
page displays.
172
Description
Select an application name from the list.
The default is Custom settings.
Enter the open port range.
Enter the triggering port range.
Enter the expiration time in seconds.
Select the open port protocol from the list:
• TCP
• UDP
• TCP/UDP
Select the triggering port protocol from the list:
• TCP
• UDP
• TCP/UDP
Select this checkbox to enable port triggering.
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
3FE-49441-ABAA-TCZZA
Nokia ONT
June 2021
Issue 1