How Do I Set Up My Remote; Loading Batteries; Entering Product Codes; Finding Unlisted Product Codes - Kenwood Sovereign Entre User Manual

Setting Up and Configuring Your Entré

How Do I Set Up My Remote?

Loading Batteries

1. Remove the cover.
2. Insert two AA batteries as illustrated below:
3. Close the cover.

Entering Product Codes

The remote supplied with your Entré is programmed to work with a number of
different brands of home entertainment devices such as TV, DSS, and cable
boxes. The code listings in the "Appendix A: Program Codes" on page 153 show
all available codes for different manufacturers.
To enter the correct product code:
1. Look up the brand name of the device you want the remote to control (see
Appendix A).
2. Press the button for a device (TV, DSS, or CBL (cable)), then press and hold
CODE SETUP on the remote.
The LED on the top of the remote blinks twice, indicating the
system is ready for you to enter a four-digit code.
3. Enter the appropriate code from the code listings, making sure the LED
blinks once after each digit is entered.
10
Make sure the LED blinks twice after you enter the last digit of
the code. This tells you the code is valid for the device you
selected. If the code you enter is incorrect, the LED blinks only
once after the last digit.
If you enter an incorrect code, or pause 10 seconds or more
while pressing the numeric buttons to enter the product code,
the remote automatically exits the code setup program. Press
again to start over.
CODE SETUP

Finding Unlisted Product Codes

If the code list does not list the brand of your unit, cycle through the available
codes stored on your remote in order to locate a working code.
To cycle through the available codes:
1. Press on the remote.
CODE SETUP
2. Press 9.
3. Press 9 again.
4. Press 1.
The remote enters the first available code cycle for you to test. For example, if
you want to control your TV but discover there are codes listed for your TV, use
this feature to run through all the available codes to locate one that is
compatible with your TV.
You may find a code that is compatible with some features of your TV but not
others. To get a closer match, select and test a different code. To do so:
1. Press .
CODE SETUP
2. Press (the TV button, if you are looking for a code for your TV) to
MODE
advance to the next available code cycle. Continue until you locate a code
with the correct available functions for your TV.
If your device does not respond to any of the available codes,
the Entré remote cannot be programmed to control it.
Complete Guide to Your Entré Entertainment Hub, ver. 2.0