Miele ProLine CS 1411 Operating And Installation Instructions page 9


During installation, maintenance, and repair work, the fryer must
be completely disconnected from the domestic electrical supply. It is
only completely isolated from the supply when:
- The circuit breakers have been switched off, or
- The fuses of the electrical installation have been completely re-
moved, or
- The plug (if present) is removed from the socket. To do this, pull
the plug, not the power cord.

Danger of electric shock. Do not use the fryer if it is damaged or if
it suffers damage during use. Switch it off immediately. Disconnect
the fryer from the domestic electrical supply. Contact Customer Ser-
vice.

If the fryer is built in behind a cabinet front (e.g., a door), do not
close the door while the fryer is in use. Heat and moisture can build
up behind the cabinet front when closed. This can result in damage
to the fryer, the housing unit, and the floor. Do not close the cabinet
front until the residual heat indicators go out.
IMPORTANT SAFETY INSTRUCTIONS
9