IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION
Risk of damage caused by incorrect installation.
Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.
Damage from falling objects.
Take care not to damage the ProLine element when installing upper cabinets or
a ventilation hood above it.
Install the upper cabinets and ventilation hood before installing the ProLine ele-
ment.
The countertop must be heat-resistant (up to 212°F / 100°C), so
that it does not become deformed or the veneer detached. The wall
strips must be heat-resistant as well.
A gas cooktop/wok must not be installed directly next to a fryer as
the gas flames could ignite the fat/oil in the fryer. It is essential to
maintain a distance of at leastIt is essential to maintain a distance of
at least 11 5/16" (288 mm) between the gas appliance and a fryer.
When installing the ProLine element, make sure that the power
cord cannot come into contact with hot appliance parts.
When installing the ProLine element, make sure that the power
cord cannot come into contact with any moving kitchen parts (e.g., a
drawer), and cannot become trapped.
Observe carefully the safety clearances listed on the following
pages.
Installation
33