Setting ([F3]) Parameter Descriptions - Yamaha DTX-PRO Reference Manual

CLICK Mode
[F3] SETTING

SETTING ([F3]) Parameter Descriptions

CLICK/SETTING
Screen Parameter Settings
SoundSet Metronome1,
Metronome2,
Claves, Cowbell,
Shaker, Stick
Beat 1/4–16/4, 1/8–16/8,
1/16–16/16
Timer OFF,
00:30–60:00
(30 second incre-
ments)
ClickOut
L&R on, off
ClickOut L&R
Phones
ClickOut
Phones
USB
ClickOut USB
ClickCountOff off, 1, 2
Description
Changes click sounds (Acc and beats) as
a set.
Chooses a time signature for the click.
Use this parameter to set the timer.
The timer status is displayed on the CLICK
screen.
To start the timer. press the [START/STOP]
button.
The remaining time will be displayed while
the timer is in use.
Press the button below "+30 SEC" ([F3])
while the timer is in use to extend the timer
by 30 seconds.
This sets whether to output click sounds to
each jack (on) or not (off).
Switches the output to the OUTPUT [R]
and [L/MONO] jacks.
Switches the output to the Phones jack.
Switches the output to the [USB TO HOST]
terminal.
Set the click sound to stop after one mea-
sure or for two measures. When set to off,
the click sound continues to play.
DTX-PRO Reference Manual 87