Yamaha DTX-PRO Reference Manual page 45

MENU Button
Screen Parameter Settings
Xstick Adjust 1–127
Ride Position off, on
FootClosePos -32 – 0
FootSplashSens off, 1–127
Description
Sets the strength for switching the cross sticking to or
from the open rim shots when hitting the rim of the
multi piezo pad connected to the [qSNARE] jack.
Increasing this value makes it easier to produce the
cross-stick sound when the pad is struck strongly.
Conversely, reducing this value makes it easier to
produce the open rim shot when the pad is struck
lightly.
Turn the cross stick setting off to always play the
open rim shot sound.
Note that this parameter is not effective when a sin-
gle-piezo pad is connected.
Switches the position sensor for the bow of the ride
cymbal on or off.
Turn the ride position on for creating tonal changes
based on location of the pad that is struck.
To use this function, you will need to connect a pad
with position sensing to the [iRIDE] jack.
You will also need to select an Inst or a voice that
supports position sensing.
For more information, refer to the Data List.
Use this parameter to adjust the position at which the
hi-hat switches from open to closed when the hi-hat
controller or the hi-hat pedal is operated. The lower
the value, the smaller the virtual opening between
the top and bottom hi-hats.
Use this parameter to set the degree of sensitivity for
detecting hi-hat foot splashes. The higher the value,
the easier it will be to produce a foot-splash sound
with a hi-hat controller.
High values may, however, result in splash sounds
being unintentionally produced when, for example,
you depress the hi-hat controller or the hi-hat pedal
lightly as you keep time. It is a good idea to set this
parameter to "off" if you do not want to play foot
splashes.
DTX-PRO Reference Manual 45