Yamaha DTX-PRO Reference Manual page 48

MENU Button
Screen
AUX In Gain
Parameter Settings
L guide
R guide
PA-HP
Phones off (
on (
Output
USB Audio
Backing Output Level 0–127
AUX In Gain 0dB, +6dB,
+12dB
Description
Select these settings for the audio input in which
the guide (click) sound and accompaniment
sound are separated into L and R channels.
The guide (click) sound and accompaniment
sound are output from Phones in the center pan
position, and the accompaniment sound is out-
put from Output and USB Audio in the center
pan position.
When using the headphones, you can adjust the
volume of the guide (click) sound with the
[CLICK] knob, and the accompaniment sound
with the [AUDIO] knob.
You can change the volume of the accompani-
ment sound output from the Output jack and
USB Audio Out by moving the cursor with "
([F2]), and then changing the settings with the
[–][+] controllers (this is separate from Phones
volume settings).
Uses only the L channel to output exclusively to
Phones in the center pan position. (AUX IN only)
This is useful in live performance situations
when connecting a PA system, such as a mixer,
to the AUX IN jack to receive the audio signals
(mono audio).
) When the Input Mode is set to stereo, L mono, R
) mono or L+Rmono, use this parameter to turn
the output destination on or off.
When the Input Mode is set to L guide or R
guide, use this parameter to adjust the volume of
the accompaniment sound output through the
Output jack and USB Audio Out.
Sets the gain for the AUX In.
"
DTX-PRO Reference Manual 48