Advertisement
FAQ
HP REVERB G2
OMNICEPT EDITION
2
1.0 OMNICEPT EDITION HEADSET
3
2.0 GENERAL QUESTIONS
7
3.0 STEAMVR
8
4.0 WINDOWS MIXED REALITY (WMR)
H P I N C . C R E A T E S T E C H N O L O G Y T H A T M A K E S L I F E B E T T E R F O R E V E R Y O N E , E V E R Y W H E R E . T H R O U G H
O U R
P O R T F O L I O
O F
E X P E R I E N C E S T H A T A M A Z E . M O R E I N F O R M A T I O N A B O U T H P V R S O L U T I O N S I S A V A I L A B L E A T :
1. One (1) year standard limited warranty. Optional Care Packs are available to extend your protection beyond the standard limited warranty. For details, visit
© Copyright 2022 HP Development Company, L.P. The information herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
7.
other countries. Intel, the Intel logo, Core and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. NVIDIA and Quadro are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S.
and other countries.
4AA8-0278ENW, April 2022
You may find that users accidentally press the Windows button on the VR controllers. This takes the
user out of the VR experience and returns them to the Cliff House. You may need to create this
DWORD to change its value:
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Dwm
Value:
DisableBloomFor6dof
Type:
REG_DWORD
Data:
WMR Controller Windows button functionality (0=Enable, 1=Disabled)
This will DISABLE the Windows button on the WMR controllers - reboot your computer
for it to take effect.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Dwm]
"DisableBloomFor6dof"=dword:00000001
RESTORE DEFAULT: This will ENABLE the Windows button on the WMR controllers - reboot your
computer for it to take effect.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Dwm]
"DisableBloomFor6dof"=dword:00000000
Q 4.8: CAN I CHANGE THE HEADSET IDLE TIMEOUT?*
By default, WMR headsets turn off after 15 minutes of idle. This will pause Mixed Reality and any VR
experience being displayed. If you have a non-interactive demonstration, you may find you want to
extend the default timeout. You may need to create this DWORD to set its value:
Key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Holographic
Value:
IdleTimerDuration
Type:
REG_DWORD
Data:
Mixed Reality Portal idle timer specified in milliseconds
This will set the WMR HMD idle timeout to 3 hours. Restart Mixed Reality Portal (if open) to take effect.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Holographic]
"IdleTimerDuration"=dword:00a4cb80
Q 4.9: THE MIXED REALITY PORTAL SAYS "CAN'T RUN MIXED REALITY
ON THIS HEADSET" BUT THIS WORKED FINE WITH MY PREVIOUS WMR
HEADSET. WHAT SHOULD I DO?
This may happen because your HP Reverb G2 requires a more powerful PC to ensure the best
experience. For more information, please review the minimum PC requirements.
P R I N T E R S ,
P C S ,
M O B I L E
H P . C O M / R E V E R B
D E V I C E S ,
S O L U T I O N S ,
hp.com/go/cpc.
N OT F O R U S E I N I N D I A
A N D
S E R V I C E S ,
W E
E N G I N E E R
Advertisement
