Canon ColorPASS-Z5000 Printing Manual page 93

A
A-3 Print Options
Option and settings:
(Default setting is underlined)
Black Overprint
Printer's default/Off/On
Brightness
85% Lightest/90% Lighter/
95% Light/100% Normal/105% Dark/
110% Darker/115% Darkest
CMYK Simulation Profile
Printer's default/SWOP-Coated/
DIC/Euroscale/Simulation-1/
Simulation-2/Simulation-3/
Simulation-4/Simulation-5/
Simulation-6/Simulation-7/
Simulation-8/Simulation-9/
Simulation-10/None/Match Copy
CMYK Simulation Method
Printer's default/Quick/Full
Description:
Select to print black text with
Off
knockouts.
Select to overprint black text.
On
Select for a substantially lighter
85%
image, for a substantially darker
115%
image, or use one of the settings in
between.
Specify the simulation goal to be used for
the current print job.
Select to utilize one-dimensional
Quick
transfer curves to adjust density output of
individual color channels.
Select to utilize four-dimensional
Full
transfer curves, which adjust for hue as
well as density of individual color
channels.
Requirements, constraints,
and information:
The setting reflects the
Printer's default
setting specified in ColorPASS Setup.
For Windows, choose
Expert Color
Print Mode to access this option.
If this option is set to , the Combine
On
Separations option must be set to
Setting this option to automatically
On
sets the Pure Black Text/Graphics option
to
On.
For more information, see page A-14 and
the Color Guide.
The setting reflects the
Printer's default
setting specified in ColorPASS Setup.
For Windows 95/98/Me and Windows
NT 4.0, choose as the Print
Expert Color
Mode to access this option.
For more information, see page A-15 and
the Color Guide.
The setting reflects the
Printer's default
setting specified in ColorPASS Setup.
For Windows 95/98/Me and Windows
NT 4.0, choose as the Print
Expert Color
Mode to access this option.
For more information, see the Color
Guide.
as the
.
Off