Canon ColorPASS-Z5000 Printing Manual page 103

A
A-13 Print Options
Option and settings:
(Default setting is underlined)
Stapler Mode
Off/Corner/Double/Single
Toner Reduction
Off/On
Transparency Interleaving
Off/Blank Interleave/
Printed Interleave
Use Master
None/1-15
Description:
Specify whether or not to staple the job.
Specify whether or not to print the
current job with a maximum toner value.
Select to print multiple
Blank Interleave
transparency sheets separated by blank,
plain paper pages.
Select to print multiple
Printed Interleave
transparency sheets separated by printed,
plain paper pages.
For variable print jobs, specify a
FreeForm master number to be used for
the job.
Requirements, constraints,
and information:
If Reverse Delivery or Stack Mode is set
to , then this option must be set to
On
If this option is set to either
Corner
or the following settings
Double, Single
must be applied:
Slip Sheet set to
Off
Stapler Mode set to
Sort
See page A-21 for more information.
If this option is set to , the following
On
settings must be applied:
Combined Separations set to
If Registration colors are specified in the
data created with page layout applications
or illustration applications, setting this
option to will have no effect.
On
For more information, see page A-24.
This option is supported with Letter or
A4 size plain paper or transparencies only.
To enable this option, Media Type must
be set to
Transparency.
See page 4-1 for more information.
This option is selectable only if FreeForm
is available.
.
On
,
Off