Network Connection; Installation Procedure - Canon Color imageCLASS MF8450c Starter Manual

Network Connection

• The following procedures are explained using sample screens from Windows XP Professional.
• For Windows 2000/XP/Server 2003/Vista/Server 2008, log on as an Administrator to install the
software.
• Click on the circled button on each screen to proceed to the next step.
• Make sure the machine is turned ON. (See "Connect Power Cord and Turn on the Machine," on
p. 9.)
• Make sure the network cable is connected to the machine. (See "Connect the LAN Cable," on
p. 8.)
• Make sure an IP address is assigned to the machine.
(See "Network Settings," in the e-Manual.)
Installation Procedure
1
Connect the machine to the network
correctly, and confirm that the power
is on.
2
Insert the UFR II/FAX User Software
CD-ROM.
Before Installation
3
If the CD-ROM Setup screen is not
displayed, click [start] on the Windows
task bar → [My Computer].
Windows Vista/Server 2008: click
[Start] on the Windows task bar →
[Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
3 Set Up Computers and Software
4
Check the boxes next to the UFR II
Printer Driver, FAX Driver and Color
Network ScanGear.
41