Canon Color imageCLASS MF8450c Starter Manual page 39

Network (Manual):
●
(See "Set IP Address Manually, " on p. 35.)
Restart the "Setup Guide":
●
<Additional Func.> → <System Management Set.> → <Start Setup Guide> → <Yes>. (See "Introduction of
the Machine, " in the e-Manual.)
The machine may enter or the Standby mode (default setting is 2 minutes) or the Sleep mode (default setting is 15 minutes)
while you are performing setup.
To change the settings, see "Introduction of the Machine" in the e-Manual.
2 Set Up the Machine
37