Table of Contents
Advertisement
20
en | Browser connection
4
Browser connection
A computer with Microsoft Internet Explorer can be used to
receive live images from the camera, control the camera, and
replay stored sequences. The camera is configured over the
network using the browser.
Note:
The camera can also be configured using the supplied Bosch
Video Client or the Bosch Video Management System.
4.1
Protected network
If a RADIUS server is used for network access control (802.1x
authentication), the camera must be configured first. To
configure the camera for a Radius network, connect it directly
to a PC via a crossed network cable and configure the two
parameters, Identity and Password. Only after these have been
configured can communication with the camera via the network
occur.
AR18-10-B012 | v1.55 | 2012.09
Installation Manual
MicroDome Camera 200 Series
Bosch Security Systems
Advertisement
Table of Contents
