16
en | Installation
3.6
Mounting
Figure 3.5 Mounting the camera
To mount the camera to a wall or ceiling:
1.
2.
3.
4.
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.
AR18-10-B012 | v1.55 | 2012.09
x2
M3 (Ø2.5 mm)
x2
Stick the supplied installation paper sticker to the surface
taking care to orientate it correctly.
Drill two holes with a diameter of 6 mm.
Insert the supplied plugs into the holes.
Attach the camera and base unit securly to the surface
using the two supplied M3 screws.
Installation Manual
MicroDome Camera 200 Series
0~
FRONT
270°
Outer
6.0mm 2 Holes
(FOR PLASTIC ANCHOR)
CABLE
CAMERA
OUTLINE
180°
Inner 2.5mm 2 Holes
(M3 TYPE SCREW)
90°
CUT LINE
Bosch Security Systems