Line In Mode - Hitachi BTN5 Owner's Manual

4 Playing Music
4.1 Bluetooth mode:
1. Power on the speaker. The Bluetooth button will
blink continuously indicating that the speaker is
ready to pair with a device.
2. On your Bluetooth enabled device search for and
pair with the Hitachi Bluetooth speaker "BTN5".
When pairing is successful the Bluetooth button
will stop blinking. You are now ready to listen to
music on your Hitachi Bluetooth speaker.
3. If you need to unpair an already paired Bluetooth
device and switch to another device, press and
hold the Bluetooth button until the Bluetooth
button starts to blink. The speaker is now ready for
pairing consistent with step 1 above.
4. When the speaker is powered on, it will automati-
cally connect to the last paired device.

4.2 Line In mode:

When a 3.5mm audio cable is inserted into the LINE IN
input, the speaker will automatically switch to the LINE
IN input. Connect one end of the 3.5mm audio cable to
the speaker unit and the other end to the device you wish
to play music from. To switch back to Bluetooth mode,
disconnect the 3.5mm audio cable.
11