ESC4000 G4S
For the ESC4000 G4S, the NVME drives may be installed in storage device bay 7 and 8 as
shown in the illustration below:
To install a U.2 drive:
1.
Install the U.2 drive to storage device bay 7 or 8.
Refer to section 2.4.2 Installing the 2.5-inch SATA/SAS/NVME storage device for the
steps on installing a 2.5-inch drive to the storage device bay.
2.
Remove the OCuLink cables from the internal SAS/HBA/Storage bracket.
OCuLink cable 2
OCuLink cable 1
ASUS ESC4000 G4 Series
Storage device bay 7 and 8
2
1
2-49