Table of Contents
Advertisement
18.
Secure the Cache Vault Power Module clip holder into the server system with the
thumbscrews that you removed earlier (A), then connect the cable from the Cache
Vault Power Module to the cable from the Cache Vault Flash Module (B).
19.
Connect connector 1 on the ASUS PIKE II card to connector 1 on the backplane and
connector 2 on the ASUS PIKE II card to connector 2 on the backplane using two mini-
SAS HD cables.
2-38
connector 1
connector 2
Chapter 2: Hardware Setup
Advertisement
Table of Contents
