Page 1
Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. MEX-XB100BT Serial No.
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. MEX-XB100BT 4-563-800-11(1)
Page 3
Right 010COV.book Page 3 Monday, September 22, 2014 2:03 PM Important notice Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO...
Activate voice dial, voice recognition when the ALBUM / “SongPal” function is on (Android™ phone only), or the Siri function (iPhone only). Skip an album for audio device. Press and hold to skip albums continuously. MEX-XB100BT 4-563-800-11(1)
Page 6
Press and hold to open the setup menu. * Not available when the BT phone is selected. /// Select a setup item, etc. ENTER Enter the selected item. / (prev/next) +/– (album +/–) VOL (Volume) +/– Remove the insulation film before use. MEX-XB100BT 4-563-800-11(1)
(hereafter “BLUETOOTH device” if not otherwise specified). For details on connecting, refer to the operating instructions supplied with the device. Before connecting the device, turn down the volume of this unit; otherwise, loud sound may result. MEX-XB100BT 4-563-800-11(1)
Page 8
IC tags. Thanks to the NFC function, data Select [MEX-XB100BT] shown in the communication can be achieved easily just by touching the relevant symbol or designated location display of the BLUETOOTH device.
With BLUETOOTH signal on: when the ignition is turned to on, this unit reconnects automatically to the last- connected cellular phone. To install the microphone For details, see “Installing the microphone” (page 34). MEX-XB100BT 4-563-800-11(1)
Storing manually While receiving the station that you want to store, press and hold a number button (1 to 6) until [MEM] appears. Receiving the stored stations Select the band, then press a number button (1 to 6). MEX-XB100BT 4-563-800-11(1)
Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference. MEX-XB100BT 4-563-800-11(1)
If a device is already connected, to start playback, press SRC to select [USB] ([IPD] appears in the display when the iPod is recognized). Adjust the volume on this unit. To stop playback Press and hold OFF for 1 second. MEX-XB100BT 4-563-800-11(1)
The selected item appears. volume on the unit. Press MENU, then select [SET SOUND] [SET BTA Rotate the control dial to select the VOL] (page 20). desired item, then press it. Playback starts. MEX-XB100BT 4-563-800-11(1)
(e.g., 123456) in this unit and the mobile device, then press ENTER on this unit and select [Yes] on the mobile device. When activating the BLUETOOTH function You can adjust the volume level. Press MENU, then select [SET SOUND] [SET BTA VOL] (page 20). MEX-XB100BT 4-563-800-11(1)
The phone number appears in the display of this unit. number from the number list, then press Press and hold a number button (1 to 6) until [MEM] appears. The phone call starts. The contact is stored in the selected preset number. MEX-XB100BT 4-563-800-11(1)
Press ENTER. do not operate the application while driving. “SongPal” is an app for controlling Sony audio devices Available Operations during which are compatible with “SongPal”, by your iPhone/ Android phone. Call What you can control with “SongPal” varies depending on the connected device.
Page 17
The message is sent out. For details on settings, refer to the help of the Making various settings application. You can adjust the various settings via iPhone/ Android phone. For details on settings, refer to the help of the application. MEX-XB100BT 4-563-800-11(1)
[HIGH], [STD]. (Available only while the source is off and the clock displayed.) CAUT ALARM (caution alarm) Activates the caution alarm: [ON], [OFF] (page 7). (Available only while the source is off and the clock is displayed.) MEX-XB100BT 4-563-800-11(1)
. CLEAR AUDIO+ STR RESET Reproduces sound by optimizing the digital Resets the setting of the steering wheel remote: signal with the Sony recommended sound [YES], [NO]. settings: [ON], [OFF]. (Automatically sets to [OFF] when [EQ10 PRESET] Notes While making settings, only button operation on is changed and/or [MEGA BASS] is set to [ON].)