Table of Contents
Advertisement
Time-setting options
en
OTime-setting options
T here are 3 different time-setting options:
T i m e - s e t t i n g o p t i o n s
A hotplate should switch off automatically
■
Kitchen timer
■
Stopwatch
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
The hotplate must be switched on.
Set the heat setting.
1.
Touch the
symbol twice. The
0
2.
up.
min lights up in the timer display.
‹‹
Within the next 10 seconds, set the desired cooking
3.
time on the control panel.
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cooking
time of the selected hotplate is always displayed.
When the time has elapsed,
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
lights up in the display for 10 seconds. The indicator
‹‹
flashes. Touch any symbol. The displays go out and
y
the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and then touch the
Change the cooking time or set to
range.
Notes
You can set a cooking time of up to 99 minutes.
■
If the cooking time has counted down to the last
■
minute, the timer display changes from minutes to
seconds.
8
indicator lights
y
symbol twice.
0
in the settings
‹‹
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 9
You can change the cooking time for a hotplate
Note:
or switch off the automatic timer for the hotplates:
Select the hotplate and then touch the
Change the cooking time or set to
range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Setting the kitchen timer
Touch the
0
symbol repeatedly until the
1.
lights up.
lights up in the timer display min.
‹‹
Set the desired time in the settings range.
2.
The timer starts counting down after a few seconds.
When the time has elapsed,
When the time has elapsed, you will hear an audible
signal and
lights up in the display for 10 seconds.
‹‹
The indicator
flashes. Touch any symbol. The
t
displays go out and the audible signal ceases.
Setting the correct time
Touch the
symbol repeatedly until the
0
lights up. Re-set in the control panel.
Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
To switch on: Touch the
indicator lights up.
x
‹‹
Touch the control panel at any point to start the time
measurement. Seconds are displayed during the first
minute, then minutes.
To switch off: Touch the
indicator lights up. Touch the control panel again at
x
any point. The timer display goes out.
symbol twice.
0
in the settings
‹‹
t
indicator
indicator
t
symbol repeatedly until the
0
appears in the timer display.
symbol repeatedly until the
0
Advertisement
Table of Contents
