Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Bosch PKF375FP1E Instruction Manual

*Getting to know your
appliance
Y ou can find the hob dimensions in the overview of
G e t t i n g t o k n o w y o u r a p p l i a n c e
models. ~ Page 2

The control panel

Displays
Heat settings
‚ - Š
Residual heat
• / œ
PowerBoost function
›
Timer
‰‰
Controls
Main switch
#
Hotplate selection
Ì
Settings range
1 û 2 û 3 û 4 û
Activating the dual-circuit hotplate
ð
Time-setting options / Childproof lock
0
PowerBoost function
à
Notes
When you touch a symbol, the respective function is
■
activated.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors.
■
The electronics could overheat.

Getting to know your appliance

The hotplates

Burner
Single-circuit hot-
$
plate
Dual-circuit hotplate
ð
When the hotplate is activated: the corresponding indicator lights up
Notes
Any dark areas in the glow pattern of the hotplate
■
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
■
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
With multi-circuit hotplates the heater elements of the
■
inner filament circuits and the heater element of the
activations may switch on and off at different times.

Residual heat indicator

The hob has a two-stage residual heat indicator for
each hotplate.
If appears in the display the hob is still hot. It may be
•
used, for example, to keep a small meal warm or to
melt cooking chocolate. As the hotplate cools down
further, the display changes to
until the hotplate has cooled sufficiently.
Activating and deactivating
Select the hotplate and touch the
ð symbol
œ . The display remains lit
en
5