Canon 1318C002 User Manual page 30

Item Label
5 ▲
6 ◄
7 ▼
8
MENU
9
BLANK
10 AUTO PC
11 COMPUTER1
12 HDMI2
13 HDMI1
14 3G-SDI
15 DisplayPort
16 CLEAR
17 FREEZE (*1)
18 OFF
19 TEST PATTERN
20 LENS-SHIFT
21
ENTER (*2)
22 ►
23 EXIT
24 STATUS
25 COMPUTER2
26 ASPECT
27 DVI
28 HDBaseT
29 ID SET
30 Numeric buttons
(*1) This function is applicable to 2D signal.
(*2) Lens Adjustment Screen appears when ENTER button is pressed when OSD is not displayed.
Press to select or change settings in the OSD.
Press to select or change settings in the OSD.
Press to select or change settings in the OSD.
Press to display, hide the OSD menu or return the previous OSD
menu.
Press to light or blank the Light output.
Press to initiate the automatic synchronization procedure.
Press to switch input signal to COMPUTER1.
Press to switch input signal to HDMI.
Press to switch input signal to 3D-SDI.
No function.
Reset the stored Remote ID.
Press to freeze the projected image.
Press to turn off the projector.
Press to display the test pattern and press again to switch to the
next test pattern. Press EXIT to return the projected image.
Press to move the lens up, down, right or left.
Press to confirm the changed settings.
Press to select or change settings in the OSD.
Press to exit the OSD menu.
Press to display the SERVICE menu (OSD).
Press to switch input signal to COMPUTER2.
Press to switch to the next aspect ratio setting.
Press to switch input signal to DVI-D.
Press to switch input signal to HDBaseT.
Press to set the Remote ID.
Press numeric to set Control ID or Remote ID.
24
Description