Table of Contents
Advertisement
Pay attention to the following points regarding the power source, power plug and handling of the
connector. Failure to do so may cause a fire, electric shock or personal injury.
■
Do not use any power source with a voltage other than the voltage indicated (AC 100–240 V).
■
Do not pull the power cord and be sure to hold the power plug or connector when removing.
Incorrect handling may damage the power cord.
■
Do not insert any metal objects into the contact parts of the power plug or connector.
■
Do not remove the power plug or connector with wet hands.
■
Insert the power plug and connector securely up to the base. Additionally, do not use a damaged
power plug or an outlet that is loose.
■
When using an extension cord, do not exceed the cord's rated capacity.
■
Periodically inspect the power plug and outlet and remove any dust or dirt from between the
plug and the outlet.
Installation and Handling Precautions
Pay attention to the following points regarding installation and handling of the projector. Failure to do
so may cause a fire, electric shock or personal injury.
■
Do not use the projector where it might get wet, such as outdoors or by bathtubs or showers.
■
Do not place containers containing a liquid on top of the projector.
■
Do not touch the projector itself, the power cord, or the cable if lightening strikes.
■
Do not move the projector until you have switched off the power, removed the power plug from
the power outlet and unplugged any other cables.
■
Unplug the projector before cleaning or maintenance.
■
Before installing or replacing a lens unit, make sure to remove the power plug from the outlet.
Failure to do so could result in an electric shock or injury.
Warning
12
Advertisement
Table of Contents
