Notes For Projection Mode - Canon 1318C002 User Manual

Notes for Projection Mode

1. Referring to the following illustration, select a Projection Mode in the ALIGNMENT menu. The
options are Front Tabletop, Front Ceiling, Rear Tabletop and Rear Ceiling.
When the projector is installed in a tilt angle over ±10 degrees, you need to select High at the High
2.
Altitude function in the LASER menu. This function sets the fan speed to high due to the high
altitude environment.
Front Table
Front Ceiling
Note:
Using the projector in the following situation may accelerate the deterioration of optical parts.
■ When the projector is installed on which projection lens faces downward.
■ When the Air intake vent of the projector side faces downward in the portrait projection.
0
Down + Front
UP + Front
90
270
102
Rear Table
180
Rear Ceiling