Print Shift Code (Optional On Rx2-S) - Hitachi IJ RX2-SD160 Instruction Manual

4.11 Print shift code (Optional on RX2-S)

(1) Overview
●Divides one day into multiple work shifts and prints a different code for each work shift.
(Example) Example of one day divided into 3 work shifts
No.
1
2
3
(
See "(2) Operation" for the shift code setup procedure of this example.)
● Shift code character can be set at only one place in one message. Up to a maximum of 10 digits can be
input.
● Shift code rules are set at the Shift code setup screen.
● For work shift, the start time is specified in hour/minute units. Up to a maximum of 48 shifts can be
specified.
● One shift code rule is held for each message. To input the same shift code at another message, use the
"Duplicate" and "Paste" function. Input the shift code rules, memorize them by pressing Duplicate , and
press Paste at the Shift code setup screen of the other message.
● Shift code characters cannot be input at the same calendar block as another calendar.
Range
0:30 to 8:14
8:15 to 16:44
16:45 to 0:29
Print result
A1
A2
A3
●Print shift code 4-46