Hitachi IJ RX2-SD160 Instruction Manual page 147

(2) Operation
Press User environment setup in the environment setup menu.
1
User environment setup
Repeat print sensor mode
Change Character orientation
Change mode
Reverse print
Print signal type
Print data changeover error
Char. Size menu 1
Char. Size menu 2
Excitation V-ref. warning
(2nd screen)
User environment setup
Print characters one by one
QR Code printing
Month 3-digit code handling
(3) Change character orientation (Change mode) supplement
● The character orientation at reciprocative printing signal input is different depending on the "Change
Character orientation" and "Change mode" set values. See the table below.
(When "Change Character orientation" = "Reverse direction printing")
Change mode
OFF = forward
OFF=reverse
[Stop ]
signal ON OFF-ON transition
Reverse direction printing
OFF=forward (ABC)
right-justified left-justified
print. -in-progress
print. complete
Disable Enable
5×7
5×8
9×8 9×7
Disable Enable
[Stop ]
Enable
Disable
180-degree rotation Normal
JAN, FEB, --
Numeric
Reciprocative printing signal and character orientation
Character
orientation
0:ABC(→)
1:ABC(←)
2: (←)
3: (→)
0:ABC(→)
1:ABC(←)
2: (←)
3: (→)
2015.07.07 12:45
Com=0
M
Manual Startup
HOME
Prev.Dsp. Next Dsp.
Back
2015.07.07 12:45
Com=0
M
Manual Startup
HOME
Prev.Dsp. Next Dsp.
Back
Reciprocative printing signal
OFF
Order of printing
Order of printing
Order of printing
Order of printing
ON
Order of printing
Order of printing
Order of printing
Order of printing
●Set the user environment 6-5