Hitachi IJ RX2-SD160 Instruction Manual page 210

No.
Excitation V-ref.
80
Review 2
81 Ink Low Warning
Makeup Low
82
Warning
Ink Shelf Life
83
Expired
Ambient
84 Temperature Too
High
Ambient
85 Temperature Too
Low
87 Ink Pressure High
88 Battery Low C
93 Ink Pressure Low
Product Speed
95
Matching Error
129 Model-key Failure Model-key recognition failed.
Language-key
130
Failure
131 Upgrade-key Fault Upgrade-key recognition failed.
Circulation System
135 Cooling Fan
Fault
Inside Temperature
136
Too High
9-8 ●On-screen message descriptions
Message
Up date the excitation voltage reference.
Print quality may become poor.
The ink level in the ink reservoir is low.
The makeup level in the makeup reservoir
is low.
Ink replacement time has come.
The ambient temperature is above the
proper level.
The ambient temperature is below the
proper level.
Ink pressure is higher than the
recommended value.
The internal battery in controller section is
low.
Ink pressure is lower than the
recommended value..
The encoder pulse rate exceeds the
available printing speed.
Language-key recognition failed.
The cooling fan of the circulation system
area is faulty.
The temperature inside the printer is
increasing.
Meaning of message Remedy
● Perform nozzle test and
update the excitation V-ref.
setting.
( Technical manual 6.11)
● Watch for the print results and
the Excitation V-ref.
Setting. for about 2 hours
after operation is started.
● Add ink within 60 minutes
( 8.1).
● Add the makeup within 60
minutes.
( 8.2).
● Replace the ink
( Technical manual 6.3).
● Ensure that the ambient
temperature is within the
operating temperature limits.
● Ensure that the ambient tem-
perature is within the operat-
ing temperature limits.
● Adjust the pressure-reducing
valve to correct the pressure.
● Contact your nearest local
distributor.
● Replace the internal battery
in engine section and set the
data/time. ( 6.2).
● Adjust the pressure-reducing
valve to correct the pressure.
● Slow the print target speed.
● Decrease N in the ink drop
use percentage (1/N).
( 4.14.1).
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Prease confirm the ink
recovery status.
● Replace the air filter or make
the space around printer.
● Contact your nearest local
distributor.