66
Chapter 6—EQ
EQ Specs
The following table contains the EQ specs.
Gain (G)
Frequency (F)
Q
1. Four-band EQs only (low and high bands only on input channels 17 through 24).
2. When the low and high EQ bands are configured as HPF and LPF, their gain controls
Bypassing the EQ
The selected channel's EQ can be turned on or off using the EQ ON switch on
the EQ page (OPTION page 2 for channels 17 through 24), or the [ENTER]
button. While the EQ page is displayed, the [ENTER] button turns the EQ on
or off regardless of the cursor position.
Resetting the EQ
To reset all the EQ parameters on the selected channel to their initial values, press the
[HIGH] and [LOW] buttons simultaneously.
The following table contains the initial EQ values.
Gain (G)
Frequency (F)
Q
1. Four-band EQs only (low and high bands only on input channels 17 through 24).
01V—Owner's Manual
Low
21 Hz–20.1 kHz (1/12 octave steps, 120 steps)
HPF, 10.0–0.10
(41 steps),
L.SHELF
function as filter on and off switches.
Low
0 dB
125 Hz
L.SHELF
1
Lo-Mid
Hi-Mid
–18.0 dB to +18.0 dB (0.5 dB steps)
10.0–0.10 (41 steps)
1
Lo-Mid
Hi-Mid
0 dB
1.00 kHz
4.00 kHz
0.70
1
High
2
LPF, 10.0–0.10
(41 steps),
H.SHELF
ENTER
1
High
0 dB
0 dB
10.0 kHz
0.70
H.SHELF