Panning Input Channels - Yamaha 01V Owner's Manual

Panning Input Channels

The Panpots, available on input channels 1 through 24 (and the effects returns), are
used to pan signals between the left and right channels of the stereo out, and the odd
and even bus outs. Panpots can be adjusted using the SELECTED CHANNEL PAN
control, the quickest method, or the panpot pages in conjunction with the cursor but-
tons, [–/DEC] and [+/INC] buttons, and PARAMETER wheel.
For Input Channels 1–16 & the Effects Returns
1. Use the [SEL] buttons to select channels.
To select input channel 13 or 14 (likewise 15 or 16), press [SEL] button 13/14 (15/16)
repeatedly. The number of the currently selected channel appears on the display. To
select the left or right channel of effects return 1 (likewise effects return 2), press [SEL]
button RETURN 1 (RETURN 2) repeatedly. As these channels are selected, the letter
"R" or "L" appears on the display next to the panpot icon.
2. Use the PAN control to pan the selected channel.
If the PANPOT AUTO SCREEN option is turned on in the preferences ("Setting 01V
Preferences" on page 203), the PAN/ROUT page shown below appears, and the Home
fader mode is selected. This page can also be located using the [PAN/ROUTING] but-
ton.
Panpots can be adjusted on this page by using the PARAMETER wheel or [–1/DEC]
and [+1/INC] buttons. In addition to the [SEL] buttons, panpots on the PAN/ROUT
page can be selected using the cursor buttons.
For Input Channels 17–24
1. Press the [OPTION I/O] button.
2. Use [SEL] buttons 17 through 24 to select channels.
3. Use the PAN control to pan the selected channel.
If the PANPOT AUTO SCREEN option is turned on in the preferences ("Setting 01V
Preferences" on page 203), the OPTION page shown below appears. This page can also
For quick panning, select
a channel and use the
PAN control.

Panning Input Channels

EQ HIGH
PAN
HI-MID
F
LO-MID
G
LOW
SELECTED CHANNEL
01V—Owner's Manual
47