Table of Contents
Advertisement
Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point
and other wireless devices. Compared with WPA/WPA2/802.1x and WPAPSK/
WPA2PSK, the WEP is less security. If the wireless network is configured in the Infra-
structure Mode and the Access Point supports WPA/WPA2/802.1x or WPAPSK/
WPA2PSK, it is recommended to use WPA/WPA2/802.1x or WPAPSK/WPA2PSK
rather than WEP.
1.
NOTE:
When GN-1040 is connected, the [WPA], [WPA2], and [WPA2PSK] buttons cannot be
selected.
2.
SUPPLEMENT:
When pressing the [WEP KEY button, the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
GN-1050 Operator's Manual — Setting Up the Infrastructure Mode
Press the [WEP] button and press the [NEXT] button.
•
The WIRELESS ENCRYPTION - WEP screen is displayed.
Enter the following items and press the [NEXT] button.
WEP ENCRYPTION
Select the bit length of the WEP key.
KEY ENTRY METHOD
Select the character code for the WEP key.
[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and
Key Entry Method.
64bit
HEX :
10
ASCII :
5
1. Setting Up Wireless Network
128bit
152bit
26
32
13
16
31
Advertisement
Table of Contents
