Toshiba GN-1050 Operator's Manual page 17

1. Setting Up Wireless Network
Specify SSID
When you select the Infrastructure Mode for the Network Type, you can specify the
SSID by selecting the available network list or manually entering the SSID.
NOTE: If you are not sure how the SSID must be specified, see the following section to deter-
mine the SSID.
Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network.
Then you can select the SSID from the list.
1.
2.
NOTES: •
•
•
16
P.16 "Selecting the SSID from the available network list"
P.17 "Entering the SSID manually"
P.11 "2. Determine the SSID"
Press the [AVAILABLE NETWORK] button.
• The AVAILABLE NETWORK screen is displayed.
Select the SSID that this equipment will connect and press
the [ENTER] button.
• The screen returns to the SSID SETTINGS screen.
The available network may not displayed according to the communication environ-
mental conditions.
If the desired SSID is not displayed, please specify the SSID manually.
P.17 "Entering the SSID manually"
This Wireless LAN supports only channel 1 to 11. This equipment cannot connect
the Access Point that uses the other channel than these channels. Please make
sure to set the channel between 1 to 11 in the Access Point.
GN-1050 Operator's Manual — Setting Up the Infrastructure Mode