Sims - Nokia 7705 SAR-Hm Installation Manual

SAR-Hm and SAR-Hmc Chassis Installation Guide
7705 SAR-Hmc Carrier Wireless Module Variants
Table 11
Nokia Part Description
Number
3HE12472AA 7705 SAR-Hmc NA
3HE12473AA 7705 SAR-Hmc NA Variant 2
3HE12474AA 7705 SAR-Hmc B31 (EMEA/CALA)
3HE12475AA 7705 SAR-Hmc B87 (EMEA/CALA)
3HE12477AA 7705 SAR-Hmc EMEA/APAC
The 7705 SAR-Hm and 7705 SAR-Hmc have a GNSS receiver that provides
location data to operators of the 7705 SAR-Hm or 7705 SAR-Hmc. See
Components

3.3.2 SIMs

The 7705 SAR-Hm and 7705 SAR-Hmc have two SIM slots to support carrier
wireless network connectivity. The system uses the 2FF Industrial Mini SIM format.
The SIMs are installed behind a tamper-resistant screw-down panel at the rear of the
chassis, facing the DIN rail. This location reduces the likelihood of tampering.
The following are the SIM requirements.
3HE 17810 AAAA TQZZA
for more information.
• Only one SIM in slot 1 is required to operate the cellular interface; Slot 2 is used
for dual SIM operation.
• A valid SIM must be procured from a service provider before operating the
cellular interface.
• To run the ADP process on the 7705 SAR-Hm and 7705 SAR-Hmc, the SIM
must be inserted in slot 1 or the ADP process will not function.
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
7705 SAR-Hm and 7705 SAR-Hmc Overview
Bands
FDD-LTE — B2, B4, B5, B8, B12 (with MFBI), B13, B14,
B25, B26, B66
TDD-LTE — B41, B42, B43, B48
FDD-LTE — B2 (with UMTS), B4 (with UMTS),
B5 (with UMTS), B7, B12, B13, B14, B25, B26, B66, B71
TDD-LTE — B41, B42, B43, B48
FDD-LTE — B3, B4, B7, B20, B28, B31, B72
TDD-LTE — B38, B42, B43
FDD-LTE — B3, B4, B7, B20, B28, B87
TDD-LTE — B38, B42, B43
FDD-LTE — B1 (with UMTS), B3, B5 (with UMTS),
B7, B8 (with UMTS), B20, B28, B32
TDD-LTE — B38, B40, B41, B42, B43
GNSS
71