Fcc Rf-Exposure Regulations - Nokia 7705 SAR-Hm Installation Manual

SAR-Hm and SAR-Hmc Chassis Installation Guide
The 7705 SAR-Hmc (3HE12472AA) system can also be configured as a CBSD
Category A or B, and is approved under the certification number FCC ID:
AS57705SARHMC-1.
The 7705 SAR-Hmc (3HE12473AA) contains the licensed transmitter module that is
approved under the certification number FCC ID: N7MMC74B.
The 7705 SAR-Hmc (3HE12473AA) system can also be configured as a CBSD
Category A or B, and is approved under the certification number FCC ID:
AS57705SARHMC-2.

2.8.2 FCC RF-Exposure Regulations

These safety requirements require additional care to ensure that normal accessible
areas near the antenna do not exceed the Uncontrolled Exposure limit, as specified
in the FCC RF-Exposure Regulations.
FCC provides two exposure limits depending on the situation: 1) "Controlled" or
occupational exposure, 2) "Uncontrolled", which defines the exposure limit to the
general public. A detailed discussion of the guidelines and adopted limits are
included in FCC technical bulletin, OET Bulletin 65.
The 7705 SAR-Hm and 7705 SAR-Hmc comply with the Bulletin OET 65 RF
Exposure limits when operating with the allowed maximum gain antennas defined by
Nokia. At least 7.9 in. (20 cm) separation distance between the operator or
bystanders and the 7705 SAR-Hm or 7705 SAR-Hmc antenna must be maintained
at all times, as defined in the FCC 2.1091.
As a mobile deployment, the LTE and WLAN ports can transmit simultaneously on a
7705 SAR-Hm. The colocated configuration must not exceed the limits listed in
Table 6
Table 6
3HE 17810 AAAA TQZZA
and Table 7.
Indoor WLAN Antenna Gain Limits
WLAN Frequency (MHz)
2412- 2484
5150-5825
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
Max Omni-directional Antenna
Gain (dBi)
7
15
Mandatory Regulations
EIRP Limit (dBm)
25
27
43